معلومات المناقصة

التأهيل المسبق لتوريد خدمة تكنولوجيا MPFM.

رقم المناقصة: 213/2026/BTB (PRE-1087-2025)

رقم مرجع الجهة المتصرفة: PRE-1087-2025

وصف المناقصة

MPFM هي تقنية تُعتبر بديلاً للفصل التقليدي للاختبارات في بعض التطبيقات ووفقًا لنطاق الآبار يحدد نطاق العمل هذا مع نظام إدارة الجودة والرسومات النموذجية المرفقة المشار إليها هنا الحد الأدنى من المتطلبات للتصميم والهندسة ومراجعة رسومات المورد المورد الفرعي والتصنيع والفحص والاختبار والطلاء وطلاء مقاومة الصدأ وتوريد نوع الزنبرك من دعم الأنابيب. يجب أن يشمل نطاق العمل للمورد المصنع فيما يتعلق بهذه الحزمة على سبيل المثال لا الحصر • التصميم والهندسة • مراجعة رسومات المورد. المورد الفرعي • التصنيع • الاختبار • الطلاء. الطلاء لمقاومة الصدأ • الفحوصات من قبل مفتش طرف ثالث • الوثائق مثل تقديم شهادات المواد والإجراءات وخطة التفتيش والاختبار إلخ • يجب على المتقدم تأكيد الامتثال الكامل للمواصفات المعمول بها في العرض

الجهة المتصرفة
بابكو للاستكشاف والانتاج ذ.م.م
مناقصة داخلية(مطروحة من قبل الجهة المتصرفة) / مناقصة مطروحة من المجلس
External
محليه ( المشاركه للشركات المسجله في دول مجلس التعاون)/ دوليه
Public (LOCAL GCC)
الضمان الابتدائي
Not Applicable
صلاحية العطاء/صلاحية الضمان الابتدائي (أيام)
90 days
قيمة وثائق المناقصة
BD 50
مدة العقد
3 Year
هل ممكن تقديم اكثر من خيار؟
No
تاريخ النشر
Thursday, 23 April 2026
آخر موعد لشراء وثائق المناقصة
Tuesday, 23 June 2026
تاريخ إغلاق المناقصة/ المزايدة
Wednesday, 01 July 2026
موعد فتح المناقصة
Thursday, 02 July 2026
هل هذه المناقصة/مزايدة مخصصة حصريًا للمؤسسات الصغيرة والمتوسطة؟
لا

ملاحظات إضافية

Vendor Pre Qualification Evaluation Form
EVALUATION CRITERIA-MPFM Technology
 
Technical Evaluation
Mandatory Technical Criteria
All Applicant must pass this mandatory section. Failure of Applicant to meet any of the criteria in this section will result in technical failure. Applicant shall confirm compliance in writing for each of the listed criteria.
STAGE 1  
S no. Criteria Unitof Evaluation
1)    Health, Safety and Environment Requirements 
1.1 Applicant has to meet applicable HSE requirements such as  HSE PLAN - Contractors tosubmit a copy of their Company's HSE Plan including Skill along with HSE Training Marix.


* Applicant meets HSE PLAN as per HSE requirement  = Pass
* Applicant do not meet HSE PLAN  = Fail
Pass/Fail
1.2 Applicant has to  submit the HSE QUESTIONAIRE completed with acceptable responses: - Focus on IIR &Severity Rate information for the last 3 years and adequacy of Applicant responses to the other questionaire information requests. along with supporting documents as proof of evidence.

* Applicant submits Completed HSE QUESTIONAIRE with supporting documents as proof of evidence = Pass
* Applicant submits incomplete HSE QUESTIONAIRE or did not submit at all =Fail
Pass/Fail
1.3 HSE Representative- Provide resume with NEBOSH Certification for all of the HSE staff that will be assigned to this project. HSE Organization chart shall be submitted.

* HSE Organization chart & resume with NEBOSH Certification submitted= Pass
* HSE Organization chart & resume not submitted or only one of these were submitted )  = Fail
Pass/Fail
1.4 Applicant has to submit internationally recognized certificate by, e.g. ISO 14001:2007and OSHAS 18001:2007/ISO45001:2018].

* Applicant submits Certificate  = Pass
* Applicant did not submit Certificate = Fail
Pass/Fail
Applicant Score of Criteria No.01
,

2)    Quality Assurance and Quality Control
2.1Applicant has to submit the QMS questionnaire with supporting documents required for each question.

* Applicant submits QMS Questionaire along with supporting documents  = Pass
* Applicant submits QMS Questionaire without supporting documents, with incomplete supporting documents or did not submit at all = Fail

Pass/Fail
2.2The Applicant shall submit a Project QA/QC Organization Chart along with a detailed Curriculum Vitae (CV) for each proposed QA/QC representative. The CV must demonstrate:

1. Degree/Diploma in Instrumentation Engineering
2. a minimum of five (5) years of verifiable experience in Instrumentation discipline, and
3. a minimum of five (5) years of relevant work in the Oil & Gas industry.

* Applicant submits QA/QC Organization Chart with Qualified CV as per skills required above  = Pass
* Applicant submits QA/QC Organization Chart without Qualified CV or did not submit at all  = Fail

Pass/Fail
2.3 Applicant has to submit sample Manufacturing Record Book (MRB) for the proposed MPFM meter. The MRB shall include relevant engineering drawings, applicable certifications such as ISO 9001, API, and ASME, standard references, material test certificates (MTCs), testing and inspection records, procedures, welding documentation, painting records, etc. and the final release note.

* Bidder submits MRB = Pass
* Bidder did not submit MRB = Fail

Pass/Fail
2.4Applicant's (Manufacturer) offered product (MPFM ) is operated in GCC Oil and Gas companies. (Minimum 3 Operators) Applicant has to submit a copy of the latest approval letter or recent order or contracts as proof of evidence.

* Applicant submits proof of evidence = Pass
* Applicant did not submit proof of evidence = Fail

Pass/Fail
2.5Contractor operates an effective documented quality management system based on the requirements of ISO 9001:2015, or a COMPANY approved equivalent such as ASME or API. Certification has to be submitted as proof of evidence.

* Applicant submits Valid Certificate  =Pass
* Applicant did not submit Valid Certificate = Fail

Pass/Fail
Applicant Score of Criteria No.02
,
3)      Financial  Requirements
3.1

Submission of the last three (3) years (years 2022, 2023 and 2024) auditedfinancial statements with Clean (unqualified) Audit Opinion.

 
Pass/Fail
Applicant Score of Criteria No.03
,
4)      Operation Requirements
4.1
Applicant has to submit letter of compliance in conformance to Section 6 of the Scope of Work.

Contractor submitted letter of compliance as per Section 6 of Scope of Work (SOW)  =Pass
Contractor submitted letter of compliance with exceptions or did not submit at all  = Fail



Pass/Fail
4.2 Applicant to provide Standard Operating Procedure, Operating Manuals, & Repair and Modification procedures of contractor items.

All Procedures and manuals specified above submitted =Pass
Partial submission out of 3 requirements above or did not submit at all = Fail
Pass/Fail
4.3 Warranty period (minimum 2 years)

Warranty Coverage equal 2 years or more = Pass
Warranty Coverage below 2 years = Fail
Pass/Fail
4.4 Applicant must have adequate service infrastructure and technical support capabilities within the GCC to support well testing operations. The Applicant shall submit valid evidence for the following:

1. Authorization to Supply MPFM (OEM or Official Dealer). Applicant must provide at least one of the following:
*Valid OEM Certificate (IF APPLICANT IS A MANUFACTURER)

* Official Dealership/Authorization Certificate issued by the OEM, with a minimum validity of 2 years. (IF APPLICANT IS LOCAL DELAER WITHIN THE GCC)


2. Presence of an Operational GCC-Based Service Centre. Applicant must provide documentary proof of at least one operational service center within the GCC by providing the following evidences (MUST PROVIDE BOTH 2)

* Certificate of Registration (Updated/Valid)
* OEM‐issued Authorized Service Centre Certificate.

3. Availability of Local Technical Support / SMEs in GCC. Applicant must demonstrate the presence of technical personnel within the GCC by providing the following evidence. (MUST PROVIDE BOTH 2 )

* OEM Certification
* Organizational Chart showing Technical Support Structure in GCC.


 

* Applicant submits ALL  the required evidences stated above = Pass

* Applicant failed to submit the required evidences or did not submit al all = Fail


Pass/Fail


Applicant Score of Criteria No.04
Only the Applicants who have passed Criteria 01, 02, 03 and 04of the technical evaluation shall be scored under (Criteria 5) of thetechnical evaluation. Applicants must pass all the criterias in order toqualify. Failure of Applicant to meet any of the criteria in this sectionwill result in technical failure
,
STAGE 2  
5)      Field Trial  (Note: ALL cost & associated cost forthe Field Trial Test will be borne by theApplicant/Supplier/Vendor/Manufacturer)
5.1
Comparison with  reference meter data:

GVF 0-90% 90-99.9%
 Liquid Flow Rate (relative) +-5% +-10%
 Gas Flow Rate (relative)  +-10% +-5%
 Water Liquid Ration (absolute) +-5% +-10%



* If MPFM Data comparing with reference meter Data  met the required sets of testingparameters as per above table   =Pass
* If MPFM Data comparing with reference meter Data do not meet therequired sets of testing parameters as per above table   = Fail
    Pass/Fail
5.2 Turndown ratio (e.g., 10:1 or 20:1) – Ability to measure accurately at low flow rates.
The acceptable range of MPFM DP  mustcover the flow rate range from minimum 30 mBar to maximum 5000 mBar .

Meets the required Min-Max MPFM DP Value of therequired flow rates = Pass
Do not meet the required Min-Max MPFM DP Value of the required flow rates =Fail
 
Pass/Fail
Applicant Score of Criteria No.05


كيفية المشاركة؟

  • على الراغبين في المشاركة في هذه المناقصة، ممن تتوافر فيهم الكفاءة اللازمة، شراء وثائق المناقصة إلكترونياً من خلال نظام المناقصات الإلكتروني التابع لمجلس المناقصات والمزايدات https://etendering.tenderboard.gov.bh وذلك اعتباراً من Thursday, 23 April 2026.
  • على مقدمي العطاءات إرفاق مبلغ الضمان الابتدائي بالمبلغ الثابت المشار إليه أعلاه أو بنسبة 1% من قيمة العطاء، أيهما أقل، وفي جميع الأحوال يجب ألا تقل قيمة الضمان الابتدائي عن 100 دينار بحريني.
  • للمناقصات على مظروفين، على مقدمي العطاءات إرفاق مبلغ الضمان الابتدائي بالمبلغ الثابت فقط المشار إليه أعلاه، على أن يتم إرفاقه ضمن العطاء الفني.
  • يتم تقديم الضمان الابتدائي على شكل شيك مصدق أو خطاب ضمان بنكي أو بوليصة تأمين من إحدى المؤسسات المالية المحلية أو تحويل بنكي (أو حسب ما هو منصوص عليه في وثائق المناقصة) على ان يكون ساري الصلاحية طوال المدة المنصوص عليها أعلاه.
  • في حال اختيار صاحب العطاء تقديم الضمان الابتدائي في شكل تحويل بنكي فيجب تقديم مبلغ الضمان بالمبلغ الثابت ولا يجوز تقديمه كنسبة من قيمة العطاء.
  • مكان إيداع العطاءات: في المكان المحدد في وثائق المناقصة.
  • كما يجب مراعاة التالي:
    • ارفاق نسخة سارية الصلاحية من شهادة السجل التجاري على أن تكون مشتملة على نشاط موضوع المناقصة ضمن أنشطتها.
    • ارفاق نسخة سارية الصلاحية من شهادة البحرنة صادرة من وزارة العمل.
  • يعتبر هذا الإعلان مكملاً لوثائق المناقصة وفي حال وجود أي اختلاف أو تضارب ما بين الإعلان ووثائق المناقصة، فيجب الاعتداد بما جاء في وثائق المناقصة.
  • تعطى المؤسسات الصغيرة والمتوسطة أفضلية بنسبة 10% في مرحلة التقييم المالي عند مشاركتها في المناقصات، وكذلك المزايدات الخاصة بالمرافق الخدمية داخل منشآت الجهات الحكومية، ويستثنى من ذلك المناقصات ذات الطبيعة الخاصة، على أن تقدم هذه المؤسسات ضمن عطاءاتها شهادة تصنيف المؤسسات الصغيرة والمتوسطة سارية الصلاحية الصادرة من وزارة الصناعة والتجارة، والتي يمكن الحصول عليها من خلال الرابط التالي: الرابط: https://www.moic.gov.bh/index.php/en/sme_services.
  • يجب على الموردين والمقاولين غير المسجلين في نظام المناقصات الإلكتروني بمجلس المناقصات والمزايدات، التسجيل من خلال الرابط الإلكتروني (تسجيل الموردين والمقاولين)، وللمساعدة التقنية في عملية التسجيل، يرجى التواصل مع المعنيين بمجلس المناقصات والمزايدات عبر البريد الإلكتروني helpdesk@tenderboard.gov.bh أو الاتصال على الرقم 17566666 973+

الاستفسارات

للاستعلام عن تفاصيل المناقصة يرجى الاتصال على:

بابكو للاستكشاف والانتاج ذ.م.م
  -