Pre-qualification for High Voltage (HV) and Low Voltage (LV) Motors.
التأهيل المسبق لمحركات الجهد العالي والمنخفض
Tatweer Petroleum is publishing Prequalification invitation for the High Voltage (HV) and Low Voltage (LV) motors. Applicants shall meet the below criteria to be evaluated further;
High Voltage (HV):
1) Applicant (Manufacturer) has confirmed compliance to Data Sheet for HV Induction Motors & attachments.
2) Technical Deviations / alternatives (If any) have been submitted in Deviation list.
3) Applicant (Manufacturer) has provided the proof of evidence of manufacturer's previous experience for manufacture and supply of HV Induction Motors as per datasheet (minimum 5 Years).
4) Applicant (Manufacturer) has confirmed that the HV Induction Motors is suitable for installation in outdoor dusty hot environmental conditions (Complying to Ingress Protection mentioned in the Datasheet) and suitable to operate continuously under the outdoor ambient conditions with air temperature (Outdoor shade temp - Max 55OC) without any degradation of performance. Applicant (Manufacturer) to indicate Max. operating temperature.
5) Applicant (Manufacturer) is certified and operates an effective documented quality management system based on the requirements of ISO 9001:2015.
Low Voltage (LV):
1) Applicant (Manufacturer) has confirmed compliance to Data Sheet for LV Induction Motors & attachments.
2) Technical Deviations / alternatives (If any) have been submitted in Deviation list.
3) Applicant (Manufacturer) has provided the proof of evidence of manufacturer's previous experience for manufacture and supply of LV Induction Motors as per datasheet (minimum 5 Years).
4) Applicant (Manufacturer) has confirmed that the LV Induction Motors is suitable for installation in outdoor dusty hot environmental conditions (Complying to Ingress Protection mentioned in the Datasheet) and suitable to operate continuously under the outdoor ambient conditions with air temperature (Outdoor shade temp - Max 55OC) without any degradation of performance. Applicant (Manufacturer) to indicate Max. operating temperature.
5) Applicant (Manufacturer) is certified and operates an effective documented quality management system based on the requirements of ISO 9001:2015.